Light Weight 400kg DC 60W 24v Sliding Gate Motor Waterproof

Light Weight 400kg Of 24VDC 60W Sliding Gate Operator Motore Dc Gate

1. This is an innovative sliding door operator, low standby power consumption is the best design for solar charging.

2. One-button simple programming, the control system automatically learns to open and close the limit.

3. Electronic soft start to ensure smooth and stable start of the motor.

4. Turn off the power to release the key and lock the operation cover.

5. Smart terminals such as photocells, alarm lights, and external receivers.

6. Easy installation and maintenance.

7. Optional wire control or remote control.

24v dc motor built in battery electric sliding gate motor 400kg,dc sliding gate operator,sliding gate opener 24v

Main Feature

1. Totally integrated electrical mechanical system (excludes racks).

2. Control board interface for optional impact-proof infrared photocells.

3. Can connect flashing light and keypad and electric lock and so on.

4. Automatic delayed closing.

5. Adjustable resistance sensitivity.

6. Auto gate stop and re-open when an obstacle is encountered.

7. Wireless remote control or wired remote control are optional.

8. 24VDC sliding gate opener can connect transformer and back up battery.

1 Unit single motor contains:

1. Transmitter*2
2. Base Plate*1
3. Key*2
4. Limit magnet*2
5. Mounting accessories*2
6. 24V flash light*2
7. Installation manaul*1

Packing:

The Sliding Gate Opener DC24 is packed in a carton box.

Measurement of carton box: 34*28*35cm Shipping weight is 10kgs

Warnings to installers and users

1. Before installation and use, please read this Manual carefully.

2. Avoid installing the product where there are vibrations, high-

temperature, high-humidity, flammable, explosives, dust or corrosive

gases.

3. As there is high voltage electricity inside the product, non-

professionals should not arbitrarily open the lid to avoid electric

shock. For debugging, look for professionals for help.

4. For loss and damage due to unauthorized changes to the original

design of the product, the original manufacturer will assume no

liability or responsibility.

5. An air-break switch must be connected with the power supply

input connector.

6. Before power on and debugging controller, manually adjust the

barrier to the middle position.

7. The power must be cut off before manually operate the barrier.

8.Make sure that the path is unobstructed when the barrier is running.

9. Safety devices such as Air-wave switch and Photocell are highly

recommended. Check and test them periodically to ensure that they

are effective.

10. Please properly dispose the accessories including plastic bag and

screws to avoid the hazards such as mistaking and chocking.

11. Please keep this Manual properly for reference.

Waterproof 24v Sliding Gate Opener

60W 24v Sliding Gate Motor

400kg 24v Sliding Gate Motor

Light Weight 400kg DC 60W 24v Sliding Gate Motor Waterproof Images